The FileHub Appliance manager is accessed at https://<your-appliance-ip-or-hostname>:9002
The configuration tab will take you through the settings needed for basic functionality.
Networking
- Hostname: This is the name the application will use. It should be set to the URL you have chosen.
- IP Address: This is the IP address matching the DNS record used in the Hostname field of the appliance. It is used for FTP/SFTP to ensure NAT is handled properly.
- External FTP IP Address: This is typically the same as IP Address; however, it can be different if the appliance has an internal IP and ports are being forwarded from an external IP address via a router.
System
The settings under the system tab should not need to be changed unless SmartFile Support has directed you to update them.
After adjusting any settings on the page perform a restart on the appliance.